Gas forklifts · Pallet handling & mast matching · 18 October 2026

Manitou MI25G Gas Forklift Review: Match the Lift to Your Working Day

From the first delivery to the last pallet put away, a forklift earns its place by fitting the work. The Manitou MI 25 G brings LPG-powered industrial handling to the shortlist—but the best buying decision starts with your loads, lift heights and site layout.

Affiliate disclosure: Worksite Safety Hub may earn a commission if you purchase through the affiliate links in this review. This does not change the price you pay.

This research-based guide covers the MI25G’s applications, load and mast planning, attachment matching and questions to ask before buying. The individual Colorado offer is recorded separately so this model guide remains useful when that listing changes. We have not inspected or operated the advertised forklift.

Where the Manitou MI 25 G Fits

Manitou describes the MI 25 G as an industrial masted forklift for handling goods. Its published applications include loading and unloading trucks, storage and moving materials. The manufacturer identifies LPG power and seated operation.

Build your enquiry around the flow of goods. A receiving area may require frequent vehicle unloading and short transfers. A production site may need repeated supply runs between workstations. A storage operation may prioritize rack height, pallet orientation and aisle access. Each situation gives the supplier a different set of requirements to assess.

A short, accurate job brief helps a supplier check the complete machine-and-load combination and quote the appropriate equipment.

Understand the 2.5-Tonne Model Rating

Manitou’s MI 25 G ST5 specification lists a maximum capacity of 2,500 kg at a 500 mm load center. It lists a maximum model lifting height of 6,500 mm. These are separate model figures: they do not establish that every mast is fitted or that 2,500 kg can be carried at every height.

For the actual truck, request a clear photograph of its capacity plate and the load chart for the fitted mast, forks and attachments. Give the seller your heaviest load’s dimensions as well as its weight. A long, uneven or offset load needs assessment using its actual center of gravity.

The useful buying question is: “What residual capacity does this configuration provide at my required height and load center?” Ask for the answer to be tied to the serial number and the supplied equipment. That turns a familiar model name into a documented fit for your operation.

Mast Height, Free Lift and Door Clearance

Write down the highest placement point and the lowest doorway or overhead obstruction on the route. Then ask for the fitted mast type, maximum lift height, lowered mast height, fully raised height and free lift.

Free lift describes the fork movement available before the mast assembly extends upward. It is particularly useful to establish when planning handling beneath a restricted ceiling. Do not use overhead-guard height alone to decide whether the truck can complete a task.

For rack work, have the supplier assess clearance with the load and pallet in position. For loading bays or trailer entry, include dock and floor ratings, access equipment and the employer’s handling procedure in the assessment.

Operator Layout and Daily Handling

Manitou’s US model description identifies a Powershift transmission, an accessible operator position, adjustable steering column and simplified dashboard. Regional and model-year specifications vary; confirm the fitted controls and equipment on the 2023 truck in the linked offer.

During an agreed inspection, have a qualified operator demonstrate starting, steering, braking, direction selection, mast movement and any fitted side-shift. Check the view to the fork tips and the load path, and establish which lights, alarms, mirrors and restraints are included.

Ask for the correct operator’s manual, current service records and maintenance requirements. Include the tires and floor surface in the application review, especially if the route crosses different indoor and outdoor areas.

Forks and Attachments: Confirm the Complete Setup

Bring the technical sheet for any attachment you intend to use. Ask the supplier to confirm carriage compatibility, mounting dimensions, attachment weight, load-center effect and the resulting capacity information.

• Fork dimensions: Confirm length, section, spacing range and suitability for the loads and pallets.
• Side-shift or positioner: Establish whether it is fitted, supplied and covered by the truck’s capacity information.
• Powered attachments: Confirm auxiliary controls, couplers, hydraulic flow, pressure and any return requirements.
• Equipment identity: Ask for attachment plates and a written list of everything included in the price.

Do not transfer hydraulic figures from another regional MI25G specification to this truck. Have the supplier or Manitou dealer confirm its serial-number-specific installation. In the United States, OSHA requires prior written manufacturer approval for modifications or additions affecting capacity or safe operation, with the relevant markings updated.

LPG Operation: Plan the Workplace Alongside the Truck

LPG is a combustion fuel, so the workplace assessment should address exhaust and ventilation. OSHA advises against operating a combustion-engine forklift in a warehouse, plant or ship without adequate ventilation. Enclosed spaces such as trailers require particular attention.

Confirm the truck’s fuel system and approved cylinder arrangement, and plan trained cylinder handling, inspection and storage under the applicable site procedures. Operator training, pre-use checks, pedestrian separation and the truck’s approved capacity remain part of putting the machine to work. These are operating requirements, not a condition assessment of the advertised forklift.

Seller Offer Snapshot — Checked 18 October 2026

The following information records the individual Machineryline offer reached through your supplied affiliate link. Reconfirm availability and the final specification when enquiring.

The listing does not state operating hours or establish the fitted mast’s maximum lift and residual capacity. Request those details rather than assuming the maximum published model specification. Manitou’s regional US and ST5 pages also show different engine and hydraulic specifications; the machine’s plates and build record establish which apply here.

Delivery Coverage and Shipping Terms

JumboBee advertises worldwide shipping, and its homepage FAQ says the platform is available in countries except those under sanctions. The supplier’s shipping page describes domestic and international transport, customs support, loading/packing and pre-shipment inspection options.

It states that domestic shipments are fully insured and that international insurance options are available at additional cost. Ask for the specific policy limits, exclusions and quotation for this shipment. These are general service statements, not confirmation of a booked route for this forklift.

The checked offer does not provide a fixed freight charge, transit time or named delivery term. Request a written quotation to your destination identifying collection, inland transport, any ocean freight, handling, insurance, customs responsibilities and unloading. Confirm the treatment of the LPG cylinder and fuel system with the carrier before dispatch.

Also obtain the seller’s final payment schedule, inspection arrangements, warranty or return terms and included documentation in writing. Ask which costs are included in the machine price and which are payable at origin or destination.

See the MI25G in Manitou’s Video

Watch Manitou North America’s MI 25G Industrial Forklift video. This manufacturer video provides model context. It is not an inspection video of the advertised truck and does not confirm its mast, options or condition.

Questions to Ask Before Contacting the Seller

1. Identity and history: Can you provide the serial number, current hour-meter photo, ownership documentation and available maintenance records?
2. Lift suitability: What capacity is available at my required height and load center with the supplied forks or attachment?
3. Site access: What are the mast heights, free lift, turning requirements and overall dimensions of this configuration?
4. Included equipment: Which forks, hydraulic functions, cylinder arrangements and accessories are included?
5. Inspection and delivery: Can I arrange an inspection and receive a complete delivered quotation to my named destination?

A useful enquiry could read: “I am interested in MI25G MV52748 for [load weight and dimensions], placing pallets at [height] through [door and aisle dimensions]. Please confirm the fitted mast, capacity chart, current hours, included equipment and delivered quotation to [destination].”

Choose the Working Package, Not Just the Model Name

The MI25G offers a clear starting point for businesses considering LPG-powered industrial handling. Make your shortlist practical: match load weight and shape, mast height, attachment fit and the operating environment. Then use the dated Colorado offer to start a focused conversation about the actual truck and complete delivered price.

Sources and Review Method

• Manitou MI 25 G US and MI 25 G ST5 — regional model information and specifications.
• Machineryline MV52748 (affiliate link) — individual machine details and photographs, checked 18 October 2026.
• JumboBee homepage and FAQ and shipping services — general delivery coverage, checked on the same date.
• OSHA forklift workplace guidance and powered industrial truck requirements.

This is a document-based buying guide, not a hands-on test or condition certification. Model specifications are separated from seller statements. The dated offer can be updated or marked sold while the application guide remains available. Explore more equipment reviews.

Join the Discussion

What would matter most when choosing an MI25G for your site: lift height, pallet dimensions or manoeuvring space? Share your handling task or ask a buying question in the comment section below.